Uses of Class
neqsim.process.equipment.pipeline.routing.PipingRouteBuilder

Packages that use PipingRouteBuilder

Package	Description
neqsim.process.equipment.pipeline.routing	Builders and route utilities for composing line-list based piping hydraulics models.

Uses of PipingRouteBuilder in neqsim.process.equipment.pipeline.routing

Methods in neqsim.process.equipment.pipeline.routing that return PipingRouteBuilder

Modifier and Type	Method	Description
PipingRouteBuilder	PipingRouteBuilder.addMinorLoss(String segmentId, String fittingType, double kValue)	Adds one K-value minor loss to a segment.
PipingRouteBuilder	PipingRouteBuilder.addSegment(String fromNode, String toNode, double length, String lengthUnit, double nominalDiameter, String diameterUnit)	Adds one route segment and assigns a generated segment id such as S1.
PipingRouteBuilder	PipingRouteBuilder.addSegment(String segmentId, String fromNode, String toNode, double length, String lengthUnit, double nominalDiameter, String diameterUnit)	Adds one route segment with an explicit segment id.
PipingRouteBuilder	PipingRouteBuilder.setDefaultHeatTransferMode(PipeBeggsAndBrills.HeatTransferMode heatTransferMode)	Sets the heat transfer mode applied to each generated Beggs-and-Brill pipe.
PipingRouteBuilder	PipingRouteBuilder.setDefaultNumberOfIncrements(int numberOfIncrements)	Sets the number of increments used for each generated Beggs-and-Brill pipe.
PipingRouteBuilder	PipingRouteBuilder.setDefaultPipeWallRoughness(double roughness, String unit)	Sets the default wall roughness used for segments without explicit roughness.
PipingRouteBuilder	PipingRouteBuilder.setMinorLossFrictionFactor(double frictionFactor)	Sets the Darcy friction factor assumption used to convert K values to equivalent L/D values.
PipingRouteBuilder	PipingRouteBuilder.setSegmentElevationChange(String segmentId, double elevationChange, String unit)	Sets segment elevation change from inlet to outlet.
PipingRouteBuilder	PipingRouteBuilder.setSegmentPipeWallRoughness(String segmentId, double roughness, String unit)	Sets segment pipe wall roughness.
PipingRouteBuilder	PipingRouteBuilder.setSegmentWallThickness(String segmentId, double wallThickness, String unit)	Sets segment wall thickness metadata and pipe wall thickness on the generated pipe.